Spark Plug Service - Honda GX610 Owner's Manual

Hide thumbs Also See for GX610:
Table of Contents

Advertisement

SERVICING YOUR HONDA ENGINE
SPARK PLUG SERVICE
Recommended
spark plugs: BPRGES (NGK)
W20EPR-U (DENSO)
Incorrect spark plugs can cause engine damage.
1.
2.
Disconnect the spark plug caps, and remove any dirt from around the spark
plug area.
Remove the spark plugs with a 13/l 6-inch spark plug wrench.
SPARK PLUG WRENCH
3. Inspect the spark plug. Replace it if the
electrodes are worn, or if the insulator
is cracked or chipped. Clean the spark
plug with a wire brush if you are going
to reuse it.
4. Measure the spark plug electrode gap
with a suitable gauge. The gap should
be 0.028-0.031
in (0.70-0.80
mm).
Correct the gap, if necessary, by care-
fully bending the side electrode.
0.028-0.031
In
(0.70-0.80
mm)
5. Install the sparkplug
carefully,
by hand,
to avoid cross-threading.
34

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gx620

Table of Contents