Basic Operation And Settings - DICE Silverline Duo Installation Manual & User Manual

Ipod/satellite for selected audi/vw vehicles

Hide thumbs Also See for Silverline Duo:

Table of Contents

SAT Emulation: Basic Operation and Settings (DUO-103-AVW)

● Set your radio to the SAT (satellite radio) source by pressing the radio source selector to select the

Silverline DUO.

● Select the DUO audio source: Within the first 10 seconds of selecting the DUO press TRACK UP or TRACK

DOWN to cycle through:

"AUX" or "SIRIUS" - Listen to an auxiliary audio device or listen to and control SIRIUS tuner connected

to DUO module. AUX requires optional cable.

"iPod" - Listen to and control iPod

"SAT" - Listen to and control factory satellite radio tuner (if available)

NOTE: To select a different DUO audio source during playback, the head unit must be turned off and

back on again!

Silverline DUO Interface Settings (available within first 5 seconds of selecting Silverline DUO):

Select PRESET 2 to set charge time after ignition off (for iPod).

Select PRESET 3 to change base volume.

Select PRESET 4 to enable/disable scrolling text.

Select PRESET 5 to set radio line display type.

Select PRESET 6 to view Silverline DUO firmware version.

Select PRESET 1 to apply settings and resume audio playback.

Note: if the iPod is unlocked for direct control, radio control will be limited to songs, playlist and albums. Text dis-

play will also be limited to show only current song information. It will not show the name of Playlist / Aritst / Album.

Table of Contents