Duo-101-Avw R2 Modification - DICE Silverline Duo Installation Manual & User Manual

DUO-101-AVW R2 Modification

If vehicle is equipped with factory satellite radio and it is to be retained, the harness modification illustrated
below is required. NOTE: This modification will only work for VW vehicles.
1 Disconnect main radio
harness and locate SAT
connector. Remove it
from main harness by
pressing on the release
tab of the SAT connector.
SAT
Connector
2
Slide out the inner part of
the SAT connecor from
plastic housing.
3 Disassemble the DUO-
101-AVW R2 connector the
same way as the factory
SAT connector.
Remove the SAT wires from
4
the factory connector
releasing the pins with a small
screw driver or ball point pen.
pins 1,3, 7
5 Relocate wires to DUO-101-
AVW R2 connector keeping
the same order and location.
pins 1,3, 7
Put plastic connector covers
6
by back on. Insert DUO-101-
AVW R2 connector to factory
VW main harness.
DUO-101-AVW
R2 connector
7 Connect ground wire to
chassis of radio.
15