Basic Operation - DICE Silverline Duo Installation Manual & User Manual

15
SAT emulation: Basic operation
Accessing the DUO as the audio source:
Much like the radio's AM/FM tuner, satellite radio or CD audio sources, the Silverline DUO is integrated to be
part of the vehicle's audio system. To access the DUO source, press the SAT button on the radio.
DUO source selection:
The DUO adds additional audio sources including iPod, SIRIUS Satellite Radio* and auxilliary audio input*. To
cycle between these sources, use the SEEK, TRACK or TUNE buttons within the first 5 seconds of accessing
the DUO as the audio source.
*These sources require additional parts/accessories/service from DICE and/or third parties.
Note: When changing source, radio may temporarily display "UPDATING" when switching between iPod and
SIRIUS Connect sources.
Silverline DUO Interface settings (within first 5 seconds of accessing the DUO as the audio source):
Press remote button 2 to set the time iPod will charge after vehicle ignition is turned OFF.
Press remote button 3 to change DUO audio gain setting.
Press remote button 4 to enable/disable scrolling text.
Press remote button 5 to set radio line display type.
Press remote button 6 to view Silverline DUO firmware version.
Press remote button 1 to apply settings and resume audio playback.