Dip Switch Configuration - DICE Silverline Duo Installation Manual & User Manual

Ipod/satellite for selected audi/vw vehicles

Hide thumbs Also See for Silverline Duo:

Table of Contents

DIP switch configuration (DUO-103-AVW only)

This setting must be performed for proper functionality of the DUO kit. See pages 23-27 to deter-

mine the correct DIP switch setting for your vehicle's specific radio (DUO-103-AVW only).

The configuration switches located on the Silverline DUO module are used to set functionality for various radio

models. Refer to pages 23-27 for correct DIP switch settings. Incorrect dip switch settings may cause the DICE

interface to not work properly or to not operate at all. Disconnect the vehicle harness from the module and

cycle ignition off for 50 seconds after changing the switches!

Silverline DUO module

Table of Contents