Basic Operation - DICE Silverline DUO Installation Manual

16

Basic operation

Accessing the DUO as the audio source:
Much like the radio's AM/FM tuner, satellite radio or CD audio sources, the Silverline DUO is integrated to be
part of the vehicle's audio system. To access the DUO source, press the SAT button (if SAT emulation is set)
or DISC button (if CDC, MD or MP3 emulation is set) on the radio. Pressing this button repeatedly will cycle
through sources present in the vehicle (CD > DUO).
DUO source selection:
The DUO adds additional audio sources including iPod, SIRIUS Satellite Radio* and/or auxiliary audio
input*. To cycle between these sources, use the SEEK, TRACK or TUNE buttons within the first 5 seconds of
accessing the DUO as the audio source.
*These sources require additional parts/accessories/service from DICE and/or third parties.
Silverline DUO Interface settings (within first 5 seconds of accessing the DUO as the audio source):
Select DISC/PRESET 1 to apply settings and resume audio playback.
Select DISC/PRESET 3 to change default volume level; use track up/down to adjust between Min and Max.
Select DISC/PRESET 4 to enable/disable scrolling text. (SAT emulation only)
Select DISC/PRESET 6 to view Silverline DUO serial number and firmware version.
DISC 2 and 5 have no settings available.