The S300; Remote - Airstream s300 User Manual

The S300

1
7
8
9
10
11

Remote

1
2
3
4
5
Model : airstream s300
IC : 5928A-MA191819
FCC ID : O7VMA191819
monitoraudio.com
2 3 4 5 6
12
6
7
1. Mains power input. Connect the supplied mains lead here.
2. 1/4" UNC threaded insert. For wall mounting the S300, via
the optional Monitor Audio Universal Speaker Mount.
3. USB input. Connect an iPod, iPhone, iPad via the Apple USB
cable (not supplied) for music playback of devices that are
not AirPlay enabled. Refer page 2. Also used for connecting
the S300 to a wireless network. Refer page 6. Devices can
also be charged via the USB, but the S300 needs to be out of
standby mode.
4. Auxiliary input. This is used to connect an additional device
via a 3.5mm stereo jack lead (not supplied).
5. Airstream connect/ AirPlay Direct. This button serves two
purposes: A short press puts the S300 into AirPlay Direct
mode. Refer page 6; holding down for 12 seconds enables
Airstream Connect mode for connecting the S300 to the
network. Refer page 7.
6. Wi-Fi Sharing/ Factory Reset button. This button also
serves two purposes: A short press is required when
connecting the S300 to a wireless network. Refer to page
6; Press and hold for 12 seconds to perform a factory reset.
Refer to page 19.
7. Microphone for the APC (Automatic Position Correction).
Measures the room characteristics. Refer page 4.
8. Input toggle. Scrolls through the available inputs in the
order of AirPlay > USB > Aux.
9. Volume up. Increases the volume level of playback.
10. Volume down. Decreases the volume level of playback
11. Standby. Either puts the S300 into standby or wakes it
from standby. When woken from standby it will start in the
previously selected input. When held down, the S300 enters
Ready Mode. Refer to page 17.
12. Information LED. Refer to page 17 for the key and
explanations of the various colours and flashing patterns.
1. Standby. Either puts the S300 into standby or wakes it
from standby. When woken from standby it will start in the
previously selected input. Ready Mode cannot be activated
by the remote.
2. Volume up. Increases the volume level of playback.
3. Previous track. Selects either the start of the current track
or the previous track.
4. Volume down. Decreases the volume level of playback
5. Input toggle. Scrolls through the available inputs.
6. Next track. Selects the next track to be played.
7. Play/ pause. Pauses and restarts playback of the current track.
3