Play Another Device Using The 3.5Mm Aux Input; Ready Mode; What Is Ready Mode; How To Enter Ready Mode - Airstream s300 User Manual

Play Another Device Using the 3.5mm Aux Input

Before proceeding, please ensure the S300 is turned on from
standby mode.
1. Insert a standard 3.5mm stereo jack cable (sold separately)
into the auxiliary input on the back of the S300 and the other
end into the device you wish to play from.
2. Press the source button on the S300 (item 8 on Page 3) or
the remote (item 5 on Page 3) until the Auxiliary source is
selected (green LED).
3. Press play on your device.
HINT
The remote will only change the volume when using
this input. You may also have to set the volume to
almost maximum on the device.
Model : airstream s300
IC : 5928A-MA191819
FCC ID : O7VMA191819
monitoraudio.com

Ready Mode

What is Ready Mode?

Ready Mode is another form of Standby. However, when in Ready
Mode, the S300 will also automatically awake if you try to play
something via AirPlay or connect/ disconnect a USB device.

How to Enter Ready Mode

1. With the S300 turned on and out of standby mode (LED not
flashing), press and hold the standby button for about 3
seconds.
2. The LED will start to flash orange indicating it is entering
Ready Mode. When it stops flashing and is illuminated
yellow, the S300 is now in Ready Mode.
It is now possible to automatically wake the S300 by either
connecting a device via the USB or streaming to it via AirPlay.
HINTS
If the S300 is placed into Ready Mode while an iOS-
device is connected via USB, it will continue to charge.
If the S300 is placed into Ready Mode whilst in Airplay
Direct mode, the iOS device will not be able to wake
the S300 if it is disconnected from the S300's Wi-Fi
network.
The S300 cannot be put into Ready Mode using the remote.
13