Factory Reset; Changing The Remote Battery; Owner Information - Airstream s300 User Manual

Factory Reset

Should the situation arise where you need to carry out a factory
reset because of problems or difficulties with the S300, follow
the steps below.
1. With the S300 powered up and out of standby mode, press
and hold the Sharing Button for approximately 12 seconds
(Item 6 on page 3).
2. The S300 will have all its settings reset when it goes into
standby mode.

Changing the Remote Battery

1. Holding the remote in your hands with the standby button
pointing away from you, push back on the black half of the
remote.
2. Separate the two halves and the battery will be present in
the black half of the remote.
3. Slide the battery out and replace only with the same type,
CR2025 3v.
Model : airstream s300
IC : 5928A-MA191819
FCC ID : O7VMA191819
monitoraudio.com

Owner Information

Product Details
Model Airstream S300
Product Serial No .........................................
Date of Purchase ..........................................
IP Address on Network ..........................................
MAC Address of S300 ............................................
Dealer Details
Dealer Name ...........................................................................................
Address ..................................................................................................
...........................................................................................................
Town ................................................................................................
Post code .........................................................................................
Country .................................................................................................
E-mail address ......................................................................................
20