Installing
Install custom drawer panels and handles
custom 3/4 "
1. Open drawers.
drawer panels
2. Remove 2 screws holding trim;
and handles
(cont.)
(ZIDI240 model
only)
3. Custom handles of your choice,
lift trims off. Retain screws.
supplied by your cabinet maker, must
be installed onto the overlay panels
before they are slid into the trims.
Countersink all screws into the backer
panels. Screws cannot protrude from
the backer panels.
Screws Must
Be Countersunk
Into Panel
Custom
Drawer Panel
Installation
4. Slide overlay panels into the trims.
5. Reinstall the side trims using the trim
screws removed earlier.
6. Place the brushed decorative covers
Handle
over the side trim to hide the screw
heads. Ensure side trim is aligned
top-to-bottom and front-to-back.
Snap into place.
6.
NOTE: For shipping purposes, the
brushed decorative cover will be
secured to the front of the unit.
Double-Drawer Refrigerator
15