Download Print this page
GE Monogram ZIDI240WII Datasheet
GE Monogram ZIDI240WII Datasheet

GE Monogram ZIDI240WII Datasheet

Double-drawer refrigerator module (custom panel required)/(stainless steel)
Hide thumbs Also See for Monogram ZIDI240WII:

Advertisement

ZIDI240WII
GE Monogram
(Custom panel required)
ZIDS240WSS
GE Monogram Double-Drawer Refrigerator Module

(Stainless steel)

Dimensions and Installation Information (in inches)

Installation Space

Locate Outlet
34-1/2"-35"
23-3/4" Min.
Depth Including
Handle:
26" Stainless Steel
Models Only
Note: If installing between frameless
cabinets, a 1/2" wide filler strip or side panel
may be required. The filler strip will act as a
spacer between the door case and adjacent cabinet
and will prevent interference with cabinet door swing.
The width of the opening must include filler panels.
The cutout depth must be 24"
• Both models can be installed flush with stardard cabinetry.
• Designed to be built-in only. Cannot be used free-standing.
• White case and drawer sides, black vented toekick with
optional stainless steel toekick supplied.
Additional Specifications:
• A 120 volt 60Hz., 15 or 20 amp power supply is required. An
individual property grounded branch circuit or circuit
breaker is recommended. Install a properly grounded 3-
prong electrical receptacle recessed into the back wall as
shown. Electrical must be located on rear wall as shown.
Note: GFI (ground fault interrupter) is not recommended.
For answers to your Monogram,
GE
appliance questions, visit our website at
®
ge.com or call GE Answer Center
800.626.2000.
Double-Drawer Refrigerator Module
®
10-1/2"
24" Min.
9"
Max.
23-3/4" Stainless Steel
Models
1-1/2"
24-7/8" Framed Models
23-3/4"
GE Profile
or
®
service,
®
For a complete food storage center, install two Monogram
refrigeration modules side-by-side.
Note: Reversible door swing on wine chillers/reserves and
beverage centers only. See below for combination cutout
dimensions.
Important Note: Products must operate from separate,
properly grounded receptacles.
34-1/2"
34-1/2" - 35"
Note: Additional cutout width may be required for
models with custom panels.
Locate Outlets
24"
10-1/2"
10-1/2"
24" Min.
9"
9"
Max.
Max.
1-1/2"
1-1/2"
47-1/2" Min.
Specification Created 12/07
Listed by
Underwriters
Laboratories
120032

Advertisement

loading
Need help?

Need help?

Do you have a question about the Monogram ZIDI240WII and is the answer not in the manual?

Questions and answers

Summary of Contents for GE Monogram ZIDI240WII

  • Page 1: Stainless Steel

    ZIDI240WII GE Monogram Double-Drawer Refrigerator Module ® (Custom panel required) ZIDS240WSS GE Monogram Double-Drawer Refrigerator Module (Stainless steel) Dimensions and Installation Information (in inches) Installation Space Locate Outlet 10-1/2" 9" Max. 34-1/2"-35" 1-1/2" 23-3/4" Min. Depth Including Handle: 26" Stainless Steel...
  • Page 2 GE Monogram Double-Drawer Refrigerator Module ® (Custom panel required) ZIDS240WSS GE Monogram Double-Drawer Refrigerator Module (Stainless steel) Dimensions and Installation Information (in inches) Grounding the Double-Drawer Refrigerator IMPORTANT - (Please read carefully) FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE PROPERLY GROUNDED.
  • Page 3 • Removable Drawer Bin - Convenient for separating loose items • Fold-Down Shelf - Maximizes usable storage space • Model ZIDS240WSS - Stainless steel • Model ZIDI240WII - Custom panels and handles required For answers to your Monogram, GE Profile ®...

This manual is also suitable for:

Monogram zids240wss