GE Monogram ZIDI240 Owner's Manual page 14

Product On stainless steel model ZIDS240, allow
22" min. clearance from the front of the
clearances
double-drawer for drawer opening.
On custom panel model ZIDI240, allow
23
double-drawer for drawer opening.
When installed into a corner, allow 2
clearance between double-drawer and
adjacent cabinet, wall or other appliances.
NOTE: Clearances are based on the
recommended 2
Custom handle clearances may vary
depending on the standoff of the custom
handles.
Installing 3/4" Overlay Panel Dimensions
custom 3/4 "
Model ZIDI240 requires field-installed
drawer panels overlay drawer panels.
and handles
• The overlay panels must be secured to
(ZIDI240 model
only)
• Custom handles of your choice, supplied
NOTE: Maximum total weight for custom
drawer panels are 25 lbs. (12
each drawer).
*Maintain a 1/4" min. gap between
14
" min. clearance from the front of the
1 ⁄
8
" handle standoff depth.
1 ⁄
8
1/4" thick backer panels that slide into
the trim. A 0.10" thick spacer panel must
be placed between the overlay and
backer panels.
by your cabinet maker, must be installed
on these overlay panels. Countersink all
screws into the backer panels. Screws
cannot protrude from the backer panels.
A
3/4" Overlay Panel Dimensions
(in inches)
12 1 ⁄ lbs. max.
B
2
1/4" Backer
*
0.10" Spacer
12 1 ⁄ lbs. max. B
2
3/4" Overlay
top and bottom drawer panels.
Built-In Dimensions/Installation
When installed in a corner:
" min.
1 ⁄
2
Black or Stainless Steel Toekick Options
Your custom panel (ZIDI240 model only)
double-drawer refrigerator is shipped with
two toekicks, a stainless steel and a black
toekick. For shipping purposes, one of
the toekicks will be secured to the back or
inside of the unit, and the second will be
installed on the unit. Keep the unused
toekick and other unused or removed
parts for possible future use.
Assemble overlay panels with glue
and screws
1 ⁄ lbs. max.
1. Center spacer
2
panel on the
backer panel,
left to right and
top to bottom.
A (Width) B (Height)
Secure the panels
" "
23 3 ⁄ 14 11 ⁄
16 16
with glue.
" "
22 1 ⁄ 14 3 ⁄
2 16
" "
23 5 ⁄ 15 1 ⁄
8 16 2. Center the spacer/backer panel on the
overlay panel. Secure with glue and
screws. Countersink all screws into the
backer panel.
Double-Drawer Refrigerator
Countertop
Double-Drawer
22" (with Custom Panels
23-1/8" min.)
Clearance for Door
Opening 2-1/2" min.
Overlay
Panel
Door
1/4"
0.10"
Backer
Spacer
Panel
Overlay Panel
Spacer Panel
Backer Panel