Table of Contents
Advertisement
4.5 Connect Function
Use the Connect Function with
the Infinite Plancha accessory
The Connect Function connects two right
side cooking zones under the accessory
and they operate as one.
First set the heat setting for one of the
cooking zones.
To activate the Connect Function, touch
. To set or change the heat setting,
touch one of the control sensors.
To deactivate the Connect Function,
touch
. The cooking zones operate in-
dependently.
4.6 Automatic Heat Up
You can get a necessary heat setting in a
shorter time if you activate the Automatic
Heat Up function. This function sets the
highest heat setting for some time (see
the diagram), and then decreases to the
necessary heat setting.
To start the Automatic Heat Up function
for a cooking zone:
1.
Touch
(
comes on in the dis-
play).
2.
Immediately touch the necessary heat
setting. After 3 seconds
in the display.
To stop the function change the heat set-
ting.
1) The Infinite Plancha accessory is not supplied with the appliance. For more information,
please contact your local supplier.
12
11
10
9
8
7
6
5
4
3
2
1
0
4.7 Power Boost
Power Boost makes more power available
1)
.
to the induction cooking zones. Power
Boost can be activated for a limited peri-
od of time ( see Technical information
chapter). After that, the induction cooking
zone automatically sets back to highest
heat setting.
To activate the function, touch
the ring comes on. As the zone gets more
hot, the color of the ring changes.
To deactivate, change the heat setting.
4.8 Power management
The power management divides the pow-
er between two cooking zones in a pair
(see the illustration). Power Boost increa-
ses the power to the maximum level for
one cooking zone in the pair. The power
in the second cooking zone automatically
decreases. The heat setting display for
the reduced zone changes between two
levels.
comes on
ENGLISH
1
2 3 4 5 6 7 8 9 10 11 12 13 14
9
.
in
Advertisement
Table of Contents
