Daily Use - Electrolux EHL8840FOG User Manual

www.electrolux.com
8
The cooking zone in
the display
A
3.4 Residual heat
WARNING!
After, a cooking session the cook-
ing zone stay hot. The risk of
burns!

4. DAILY USE

4.1 Activation and deactivation
Touch
activate the appliance.
4.2 Automatic Switch Off
The function deactivates the
appliance automatically if:
• All cooking zones are deactivated.
• You do not set the heat setting after
you activate the appliance.
• You spill something or put something
on the control panel for more than 10
seconds, (a pan, a cloth, etc.). The
sound operates some time and the ap-
pliance deactivates. Remove the object
or clean the control panel.
• The appliance gets too hot (e.g. when,
a saucepan boils dry). Before you use
the hob again, the cooking zone must
be cool.
• You use incorrect cookware. The sym-
bol ? comes on and the cooking zone
deactivates automatically after 2 mi-
nutes.
• You do not deactivate a cooking zone
or change the heat setting. After some
time, the appliance deactivates. See the
table.
The Automatic Heat Up function operates.
OptiHeat Control. The cooking zone is off. The Di-
mension and colours show the residual heat:
• Big red - still cooking
• Big bright red - keep warm
• Small bright red - still hot
• Small white - the cooking zone is cold
for 1 second to activate or de-
Description
The induction cooking zones make the
heat necessary for cooking directly in the
bottom of the cookware. The glass ce-
ramic is hot from the heat of the cook-
ware.
• The relation between heat setting and
times of the Automatic Switch Off func-
tion:
– 1 — 3 — 6 hours
– 4 — 7 — 5 hours
– 8 — 9 — 4 hours
– 10 — 14 — 1.5 hours
4.3 Language selection
To change the language, start the appli-
ance with and than touch OK. Set the
language menu with arrows. Touch OK to
confirm. The display shows the list of lan-
guages. Touch or
guage. Touch OK to confirm.
4.4 The heat setting
Touch the control bar at the heat setting.
Move your finger along the control bar to
change the setting. Do not release before
you have a correct heat setting.
to set the lan-