Conference; To Establish A Broker Call; To Answer A Camped-On Call - NEC DT330 User Manual

CONFERENCE

DT330/310
With call in progress, ask party to hold.
Press key, receive interrupted dial tone.
Transfer
Dial desired number.
After call is answered, press
lights.
Three-way conference is established.
CONF
4:26 PM TUE 13 APR 2004
Using Soft Key
With a call in progress, press
desired number.
After call is answered, press CONF Soft Key.
Three-way conference is established.
CONF
4:26 PM TUE 13 APR 2004
MIC
If one party hang up, other two remain connected.
Conf LED goes out.

TO ESTABLISH A BROKER CALL

DT330/310
While engaged in a call and wishing to consult a
third party, press
Transfer
key. The LED
Conf
key and dial
Transfer
>>>
key. Caller is automati-
cally placed on hold.
Dial desired party to consult.
Press key to return to original caller. Third
Transfer
party is automatically placed on hold.
By repeating these steps, it is possible to alternate
between calls.
Note: The display indicates connected station or trunk
at any given time.

TO ANSWER A CAMPED-ON CALL

DT330/310
While engaged in a call, receive the camp-on indi-
cation (one short tone burst). LED of
flashes.
Answer
Press key. Call in progress is placed on
hold.
Connection to camped-on call is established.
Answer
Press key to return to original call.
Camped-on call is placed on hold.
By repeating these steps, it is possible to alternate
between calls. Display indicates connected station
or trunk at any given time.
CAMP ON DDD
4:26 PM
50
Answer
Trunk Trunk
type number
3
TUE 13 APR 2004
key