Table of Contents
Advertisement
Available languages
Available languages
26 www.electrolux.com
How to activate the acoustic signal
for the end of programme
1. Press the on/off button to activate the
appliance.
2. Do the Reset function.
3. Press and hold, at the same time,
Program and MyFavourite until the
indicators of Delay, Program and My-
Favourite start to flash.
4. Press MyFavourite.
• The indicators of Delay and Pro-
gram go off.
• The indicator of MyFavourite contin-
ues to flash.
6. BEFORE FIRST USE
1. Make sure that the set level of the wa-
ter softener agrees with the water
hardness in your area. If not, adjust
the water softener. Contact your local
water authority to know the water
hardness in your area.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
6.1 Adjusting the water softener
German
degrees
(°dH)
51 - 70
43 - 50
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
< 4
Water hardness
French
mmol/l
degrees
(°fH)
91 - 125
9.1 - 12.5
76 - 90
7.6 - 9.0
65 - 75
6.5 - 7.5
51 - 64
5.1 - 6.4
40 - 50
4.0 - 5.0
33 - 39
3.3 - 3.9
26 - 32
2.6 - 3.2
19 - 25
1.9 - 2.5
7 - 18
0.7 - 1.8
< 7
< 0.7
• The display shows the current set-
ting.
Acoustic signal on.
Acoustic signal off.
5. Press MyFavourite to change the
setting.
6. Press the on/off button to deactivate
the appliance and to confirm the set-
ting.
5. Processing residues can stay in the
appliance. Start a programme to re-
move them. Do not use detergent and
do not load the baskets.
If you use the combi detergent
tablets, activate the Multitab op-
tion.
Clarke
degrees
64 - 88
53 - 63
46 - 52
36 - 45
28 - 35
23 - 27
18 - 22
13 - 17
5 - 12
< 5
Water softener
adjustment
Manual
Elec-
tronic
1)
10
2
1)
9
2
1)
8
2
1)
7
2
1)
6
2
1)
1)
2
5
1
4
1
3
1
2
2)
2)
1
1
Advertisement
Chapters
Table of Contents
