To Remove The Catalytic Back Panel, Side Liners (If Fitted) And Roof Liner - Miele H 4220 Operating Instructions Manual

Cleaning and care
To remove the catalytic back panel,
side liners (if fitted) and roof liner
Make sure the oven heating
elements are switched off and cool.
Danger of burning.
The catalytic panels and liners can be
removed for cleaning if necessary.
– Back panel
^ Remove the runners.
^ Loosen the screws in the back panel
and take it out.
The oven must not be used without
the back panel fitted.
This could cause considerable
injury.
Reassemble in the reverse order,
carefully ensuring all parts are correctly
in place.
60
– Roof liner
^ Remove the runners.
^ Unscrew the wing nut.
Lower the top heating element
carefully. Do not use force to pull it
down as this can cause the element
to break.
^ Take out the roof liner.
Reassemble in the reverse order,
carefully ensuring all parts are correctly
in place.
– Side liners
(depending on model)
^ Remove the runners.
^ Lift the side liners up slightly before
removing them.
Reassemble in the reverse order,
carefully ensuring all parts are correctly
in place.