Set Time Of Day And Date - Orbit 57880 User Manual

the RESET button again unless you want to completely remove all
your programming .
User Controls
Set the Time of Day and Date
• Turn the rotary dial to the
• 12:00 PM will appear in the display with three arrows
pointing to the year, month, and day . [See Figure 1]
• Press and hold the button to advance the clock to the cor-
rect time of day . Use the
correct time of day is reached, press the
lock in the time . To increase or decrease more rapidly, hold
down either the or
rapid advance mode .
• A blinking cursor will appear below the arrow for the year,
month, and date when programming .
• Use the and buttons to set the correct year, then press
ENTER .
• Use the and buttons to set the correct month, then press
ENTER .

08WTM005637 57880-24 rB.indd 4
TImE/DATE position .
button to go in reverse . When the
ENTER
button to
buttons until the display goes into
• Use the and buttons to set the correct date, then press
ENTER . The display will show the correct time and date .
Note: If a watering schedule is not entered into the timer, the factory
installed fail-safe program will turn on each station every day for 10 min-
utes. To avoid accidental station activation, either turn the rotary switch
to off or enter a watering schedule.
Figure 1: LCD Display with Surrounding Information
11/15/07 3:34:27 PM