Orbit 57880 User Manual page 8

NO DAYS ASSIGNED
ENTERING WATERING DAYS
Figure : LCD Display with Watering Days

08WTM005637 57880-24 rB.indd 8
STEp : WATERING DURATIONS
To set the duration for each station/zone assigned to "program B"
please do the following:
• Turn the rotary dial to the STATION DURATION
in "program B" . The display will show a "B" and MINS . [See
Figure 6]
NEXT
• Press the key until the cursor blinks over the first sta-
tion assigned to "program B" . Using the "Watering Plan" as
our example, this would be station 5 . [See Figure 2]
• Press and hold the or key to enter the watering duration
and press the ENTER key . You should see a "B" over the
Station just programmed . [See Figure 6]
• Following the steps above to set the watering duration for each
remaining station assigned to "program B" (30 min for station
5 and 30 min for Station 6 our example) .
• To skip a station, press the NEXT
• To erase previously programmed watering durations, press the
CLEAR key .
STEp : ASSIGNING WATERING INTERvALS
• Turn the rotary dial to WATERING
will blink to the left of the word Interval . [See Figure 7]
• Press and hold the or keys to select the number of days
between watering . Example: If you want to water once every 10
days, set the interval at 10.
• To activate the watering interval, press ENTER . Example: If
an interval of "3" is entered today, the timer will water for the first
time today, and then again every "3" days.
• To select odd or even day watering, press NEXT . The cur-
sor will move to either the odd or even setting, then press
ENTER .
• To erase a schedule, press CLEAR . To enter a new schedule,
press NEXT .
position
key .
INTERvAL . The cursor
11/15/07 3:34:28 PM