Sony Digital 8 DCR-TRV120 Operating Instructions Manual page 82

Superimposing a still image in the "Memory Stick" on a moving
image – MEMORY MIX
Before operation
Insert a Hi8
camcorder.
(1) Set the POWER switch to CAMERA.
(2) Press MEMORY MIX in the standby mode.
(3) Press MEMORY+/– to select the still image you want to superimpose.
(4) Turn the SEL/PUSH EXEC dial to select the desired mode.
(5) Press the SEL/PUSH EXEC dial.
(6) Turn the SEL/PUSH EXEC dial to adjust the effect.
(7) Press START/STOP to start recording.
2
MEMORY MIX
M. CHROM
Still image
3
82
/Digital8
The last recorded or last composed image appears on the lower part of the
screen as a thumbnail image.
To see the previous image, press MEMORY –. To see the next image, press
MEMORY+.
The mode changes as follows:
M. CHROM y M. LUMI y C. CHROM y M. OVERLAP
The still image is superimposed on the moving image.
M. CHROM – The color (blue) scheme of the area in the still image which is
to be swapped with a moving image
M. LUMI – The color (bright) scheme of the area in the still image which
is to be swapped with a moving image
C. CHROM – The color (blue) scheme of the area in the moving image
which is to be swapped with a still image
M. OVERLAP – No adjustment necessary
The fewer bars there are on the screen, the stronger the effect.
100–0021
tape for recording and a "Memory Stick" into your
4
5
6
1
M. LUMI
M. LUMI
M. LUMI
100–0021
I I I • • • •
100–0021
I • • • • • •
100–0021