Table of Contents
Advertisement
Changing the menu settings
Icon/item
LCD B. L.
LCD COLOR
CONTINUOUS*
QUALITY*
FLD./FRAME*
PRINT MARK*
PROTECT*
SLIDE SHOW*
DELETE ALL*
FORMAT*
PHOTO SAVE*
* DCR-TRV320 only
Notes on LCD B.L.
• When you select BRIGHT, battery life is reduced by about 10 percent during recording.
• When you use power sources other than the battery pack, BRIGHT is automatically selected.
Notes on formatting
• Supplied or optional "Memory Stick"s have been formatted at factory. Formatting with this
camcorder is not required.
• Do not turn the POWER switch or press any button while the display shows FORMATTING.
• You cannot format the "Memory Stick" if the write-protect tab on the "Memory Stick" is set to
LOCK.
• Format again if the message
Formatting erases all information on the "Memory Stick"
Check the contents of the "Memory Stick" before formatting.
• Formatting erases sample images on the "Memory Stick."
• Formatting erases the protected image data on the "Memory Stick."
66
Mode
Meaning
z BRT NORMAL
To set the brightness on the LCD screen normal
BRIGHT
To brighten the LCD screen
To adjust the color on the LCD screen, turning
the SEL/PUSH EXEC dial to adjust the
following bar
to lighten
z OFF
Not to record continuously
MULTI SCRN
To record 9 images continuously (p. 77)
z FINE
To record still images in the fine image quality
mode, using the "Memory Stick"
STANDARD
To record still images in the standard image
quality mode, using the "Memory Stick"
z FIELD
To record moving subjects
FRAME
To record stopping subjects in high quality
z OFF
To cancel print marks on still images.
ON
To write a print mark on the recorded still
images you want to print out later
z OFF
To cancel print marks on still images.
ON
To protect selected still images against
accidental erasure (p. 96)
———
To play back images in a continuous loop
(p. 94)
———
To delete all the images (p. 98)
z RETURN
To cancel formatting.
FORMAT
To format an inserted "Memory Stick."
1. Select FORMAT with the SEL/PUSH EXEC
dial, then press the dial.
2. Turn the SEL/PUSH EXEC dial to select
FORMAT, then press the dial.
3. After EXECUTE appears, press the SEL/
PUSH EXEC dial. FORMATTING appears
during formatting. COMPLETE appears when
formatting is finished.
———
To duplicate still images (p. 86)
appears.
to darken
POWER
switch
VTR
CAMERA
MEMORY
VTR
CAMERA
MEMORY
MEMORY
VTR
MEMORY
MEMORY
VTR
MEMORY
VTR
MEMORY
MEMORY
VTR
MEMORY
VTR
MEMORY
VTR
Hide quick links:
Advertisement
Table of Contents
