Step 2 Inserting A Cassette - Sony Digital 8 DCR-TRV120 Operating Instructions Manual

Step 2 Inserting a cassette

We recommend using Hi8
(1) Prepare the power supply (p. 9).
(2) Open the lid of the cassette compartment, and press EJECT. The cassette
(3) Insert a cassette with its window facing out and the write-protect tab on the
(4) Close the cassette compartment by pressing the
(5) Close the lid of the cassette compartment.
2
To eject a cassette
Follow the procedure above, and eject the cassette in step 3.
Notes
•Do not press the cassette compartment down. Doing so may cause malfunction.
•Your camcorder records pictures in the Digital8
• The recording time when you use your camcorder is half of indicated time on Hi8
•If you use standard 8
pattern noise may appear when you play back standard 8
(including other DCR-TRV120/TRV320).
•The cassette compartment may not be closed when you press any part of the lid other
than the
•Do not pick up your camcorder by holding the lid of the cassette compartment.
To prevent accidental erasure
Slide the write-protect tab on the cassette to expose the red mark.
14
compartment opens automatically.
cassette up.
compartment. The cassette compartment automatically goes down.
3
tape. If you select the LP mode in the menu settings, 3/4 of indicated time on Hi8
tape.
mark.
/Digital8 video cassettes.
tape, be sure to play back the tape on this camcorder. Mosaic
mark on the cassette
4,5
system.
tape on other camcorders