Sony Digital 8 DCR-TRV120 Operating Instructions Manual page 111

Troubleshooting
Others
Symptom
The Remote Commander supplied
with your camcorder does not work.
The picture from a TV or VCR does
not appear even when your
camcorder is connected to outputs on
the TV or VCR.
The melody or beep sounds for 5
seconds.
While charging the battery pack, no
indicator appears or the indicator
flashes in the display window.
Cause and/or Corrective Actions
• COMMANDER is set to OFF in the menu settings.
c Set it to ON. (p. 63)
• Something is blocking the infrared rays.
c Remove the obstacle.
• The batteries are inserted in the battery holder with the +
– polarities incorrectly matching the + – marks.
c Insert the batteries with the correct polarity. (p. 127)
• The batteries are dead.
c Insert new ones. (p. 127)
• DISPLAY is set to V-OUT/LCD in the menu settings.
c Set it to LCD. (p. 63)
• Moisture condensation has occurred.
c Remove the cassette and leave your camcorder for at
least 1 hour to acclimatize. (p. 116)
• Some troubles has occurred in your camcorder.
c Remove the cassette and insert it again, then operate
your camcorder.
• The AC power adaptor is disconnected.
c Connect it firmly. (p. 13)
• Something is wrong with the battery pack.
c Contact your Sony dealer or local authorized Sony
service facility.
111