Recording An Image From A Tape As A Still Image - Sony Digital 8 DCR-TRV120 Operating Instructions Manual

Recording an image from a tape as a still
image
– DCR-TRV320 only
Your camcorder can read moving image data recorded on a tape in the Digital8
system, and record it as a still image on a "Memory Stick". Your camcorder can also
take in moving image data through the input connector and record it as a still image on
a "Memory Stick".
Before operation
Insert a tape recorded in the Digital8
camcorder.
(1) Set the POWER switch to VTR.
(2) Press N. The image recorded on the tape is played back.
(3) Keep pressing PHOTO lightly until the picture from the tape freezes.
(4) Press PHOTO deeper. The image displayed on the screen will be recorded on
2
REW
When the acccess lamp is lit or flashing
Do not shake or strike the unit. As well do not turn the power off , eject the "Memory
Stick" or remove the battery pack. Otherwise, the image data breakdown may occur.
If
The inserted "Memory Stick" is imcompartible with your camcorder because its format
does not comform with your camcorder. Check the format of the "Memory Stick".
If you press PHOTO lightly in the playback mode
Your camcorder stops momentarily.
Sound recorded on a tape
You cannot record the audio from a tape.
Titles superimposed on tapes
You cannot record the titles on the "Memory Stick." However, you can record the titles
which have already been recorded on tapes.
When you press PHOTO on the Remote Commander
Your camcorder immediately records the image that is on the screen when you press
the button.
84
CAPTURE appears on the LCD screen or in the viewfinder. Recording does
not start yet.
the "Memory Stick". Recording is complete when the bar scroll indicator
disappears.
PLAY FF
3
appears on the LCD screen or in the viewfinder
system and a "Memory Stick" into your
4
CAPTURE
1