Panasonic DP-C265 Operating Instructions Manual page 10

This completes the authentication.
After completing the authentication, you can
use the selected function (copying, faxing,
scanning, or printing).
Note:
Press the Reset key twice to log out from the
authentication.
If the authentication fails, one of the following messages will appear.
NOTE
Authentication Failed
Log-on Attempts Exceeded
Connection Failed
Protocol Error
Server not Found
Authentication is cancelled if no operation is performed on the machine within a certain period of
time after authentication is completed. In this case, you need to perform User Authentication again
before using the machine. The system administrator can specify the ID Timeout Period. For details,
refer to ID Timeout Setting (see page 18) and Auto Reset Time Setting (see page 20).
The system administrator can specify whether authentication is required independently for each
function (copying, faxing, scanning, and printing). For details, refer to Authentication Setting (see
page 14).
10
Message
The login failed.
Check your user name and password.
Check whether the date and time are set properly.
The system has been locked because the permitted number
of log-on attempts has been exceeded. Please contact the
system administrator.
Unable to connect to the authentication server. Please contact
the system administrator.
Unable to connect to the authentication server. Please contact
the system administrator.
Unable to locate the authentication server.
Check whether the DNS domain name is set properly
(see page 16).
Check whether the Internet Parameters are set properly.
TCP/IP Address
TCP/IP Subnet Mask
TCP/IP Default Gateway
DNS Server Addresses
Explanation