Installing The Sun Shield - Cisco 6400 Installation Manual

Chapter 2 Camera Installation
Push the RJ45 plug into the housing (D) and tighten the sealing nut.
Step 7
Attach the gasket to the front surface of the housing (D).
Step 8
Step 9 Connect the Ethernet cable to the RJ45 jack and tighten the waterproof connector.

Installing the Sun Shield

To install the sun shield, perform the following steps.
Procedure
Step 1 Attach the two included standoff screws to the top of the 6400 IP camera.
OL-28494-01
(E)
Cisco Video Surveillance 6400 IP Camera Installation Guide
Installing the Sun Shield
2-9