Select And Start A Washing Programme - Electrolux ESF 63025 User Manual

20 electrolux select and start a washing programme
If the drying results are not
satisfactory we recommend that
you:
1. Fill up the rinse aid dispenser
with rinse aid.
2. Set the rinse aid dosage to posi-
tion 2.
If you decide to turn back to the use
of the standard detergent system
we advise that you:

Select and start a washing programme

1. Check that the baskets have been
loaded correctly and that the spray
arms are free to rotate
2. Check that the water tap is opened
3. Close the dishwasher's door.
4. Turn the programme knob until the
programme marker corresponds
with the desired programme (see
"Washing programmes" chart).
– The On/Off indicator light illumi-
nates.
– The indicator lights of the phases
foreseen for the programme start
flashing.
5. Press the start/cancel button, the
programme starts automatically and
the start/cancel indicator light illumi-
nates.
– As soon as the programme starts,
the phase indicator lights turn off
except for the indicator light for the
1. Fill up the dispensers for salt and
rinse aid again.
2. Adjust the water hardness setting to
the highest setting and perform
washing programme without loading
any dishes.
3. Adjust the water hardness setting
according to the hardness of the wa-
ter in your area.
4. Adjust the rinse aid dosage.
phase in progress which will re-
main lit with a static light.
During the running of the pro-
gramme, it is not possible to change
the selection made by turning the
programme knob in correspond-
ence of another programme or the
Off position. If you want to change
the running programme you must
cancel the selection made (see
"Cancel a washing programme in
progress").
Setting and starting the
programme with "delay start"
• Allows the start of the programme to
be delayed by 3 hours.