Something Not Working - Electrolux ESF 63025 User Manual

26 electrolux something not working

Something not working

The dishwasher will not start or stops
during operation.
Certain problems are due to the lack of
simple maintenance or oversights,
which can be solved with the help of the
Fault code and malfunction
• continuous flashing of the start/can-
cel indicator light
• 1 flash of the end of programme indi-
cator light
The dishwasher does not fill with water
• continuous flashing of the start/can-
cel indicator light
• 2 flashes of the end of programme
indicator light
The dishwasher will not drain
• continuous flashing of the start/can-
cel indicator light
• 3 flashes of the end of programme
indicator light
indications described in the chart, with-
out calling out an engineer.
Switch off the dishwasher, open the
door and carry out the following sugges-
ted corrective actions.
Possible cause and solution
• The water tap is blocked or furred
with limescale
Clean the water tap
• The water tap is turned off
Turn the water tap on
• The filter (where present) in the threa-
ded hose fitting at the water inlet valve
is blocked
Clean the filter in the threaded hose
• The water inlet hose has not been
correctly laid or it is bent or squashed
Check the water drain hose connection
• The sink spigot is blocked
Clean out the sink spigot
• The water drain hose has not been
correctly laid or it is bent or squashed
Check the water drain hose connection
• Anti-flood device is activated
Close the water tap and contact your
local Service Force Center.