Something Not Working - Electrolux ESF 63025 User Manual

Fault code and malfunction
• The programme does not start
Once these checks have been carried
out, switch on the appliance: the pro-
gramme will continue from the point at
which it was interrupted.
If the malfunction or fault code reap-
pears contact the Service Force Centre.
For other fault codes not described in
the above chart, please contact your lo-
cal Service Force Centre, quoting the
model (Mod.), product number (PNC)
and serial number (S.N.).
something not working electrolux 27
Possible cause and solution
• The dishwasher's door has not been
properly closed
Close the door
• The main plug is not plugged in
Insert the main plug
• The fuse has blown out in the house-
hold fuse box
Replace the fuse
• Delay start has been set
If dishes are to be washed immediately,
cancel the delay start
This information can be found on the rat-
ing plate located on the side of the
dishwasher door.
So that you always have these numbers
at hand, we recommend you to make a
note of them here:
Mod. : . . . . . . . . . . . . . . . . . . . . . . .
PNC :. . . . . . . . . . . . . . . . . . . . . . . .
S.N. : . . . . . . . . . . . . . . . . . . . . . . . .