Abit IT5 Series User Manual page 83

Quick Installation
Adjusting other jumpers:
functions or are not to be adjusted in normal operation. Adjust them according
to the following recommendations.
CCMOS ¡G Put jumper on pin 1 and pin 2.
JC1 ¡G OFF (don' t need to use any jumper).
BIOS Setup:
the steps described above and completed the installation, when you power the
computer on, you will see the following message displayed:
TO ENTER SETUP BEFORE BOOT PRESS CTRL-ALT-ESC OR
DEL KEY
Press immediately Del key to enter BIOS Setup. Select Load Setup Defaults,
than enter CPU Soft Menu to set CPU parameters.
Some jumpers are reserved for future
Parameters and CPU settings After you have followed
A-7