Abit FATAL1TY AN9 32X User Manual page 39

User Define:
※ The wrong settings of the multiplier and external clock in certain circumstances
may cause CPU damage. Setting the working frequency higher than the PCI
chipset or processor specs, may cause abnormal memory module functioning,
system hangs, hard disk drive data lose, abnormal functioning of the VGA card,
or abnormal functioning with other add-on cards. Using non-specification
settings for your CPU is not the intention of this explanation. These should be
used for engineering testing, not for normal applications.
※ There will be no guaranty for the settings beyond specification. Any damage of
any component on this motherboard or peripherals resulting therein is not our
responsibility.
- Multiplier Factor
This item displays the multiplier factor for the CPU installed.
- External Clock
This item selects the external clock frequency. Due to the specification limit of the CPU you
installed, the speed you set over its standard bus speed is supported, but not guaranteed.
Voltages Control
This option allows you to switch between the default and user-defined voltages. Leave this
setting at default unless the current voltage setting cannot be detected or is not correct. The
option "User Define" enables you to select the following voltages manually.
- CPU Core Voltage
- DDR2 Voltage
- NB 1.2V Voltage
- NB PCIE 1.2V Voltage
- SB 1.5V Voltage
- HyperTransport Voltage
- DDR2 Reference Voltage
3-3