Recording - Yamaha DVX-S100 Owner's Manual

Recording adjustments and other operations are
performed from the recording components. Refer to the
operation instructions for these components.
1
Turn on the power of this unit and all
connected component.
2
Select the source component you want to
record from.
The procedure for selecting an input source is the
same as the one described in "BASIC PLAYBACK"
on page 21.
3
Start playback (or select a broadcast station)
on the source component.
4
Start recording on the recording component.
Notes
• Do a test recording before you start an actual recording.
• When this unit is set in the standby mode, you cannot record
between the components connected to this unit.
• The setting of BASS BOOST, VOLUME, "5 L/R BALANCE"
on the SET MENU and DSP programs does not effect the
recorded material.
• A given input source is not output to the same OUT (Rec)
channel. (For example, the signal input from VCR IN is not
output to VCR OUT.)
• Check the copyright laws in your country to record from
records, CDs, radio, etc. Recording of copyrighted material
may infringe copyright laws.
• It is not possible to record the sound effect created by this
unit's DSP processing.
• While recording video images played during the DVD mode,
do not display ON-SCREEN menu. If displayed, the menu will
be also recorded.
• During digital recording, Karaoke vocal and Cinema dialog
functions do not work. (See pages 35 and 36.)
If you playback a video source that uses scrambled or
encoded signals to prevent it from being dubbed, the
picture itself may be disturbed due to those signals.
28

RECORDING

I Special considerations when
recording DTS software
Attempting to digitally record the DTS bitstream will
result in noise being recorded.
I Timer playback/recording
This unit can perform playback or recording with an
external timer (not supplied). Refer to the operating
instructions for the component and the timer to be used.
Notes
• Stored data, such as input source, will be reflected when
playback or recording with the timer.
• If you do not want any sound output when recording with a
timer, turn the volume down.