Adjusting The Parameter Settings For Pro Logic Ii Music - Yamaha DVX-S100 Owner's Manual

CHANGING THE PARAMETER SETTINGS FOR DSP PROGRAMS

Adjusting the parameter settings for PRO LOGIC II Music

I Changing parameter settings
You can adjust the values of PRO LOGIC II Music
parameters so the sound fields are recreated accurately in
your listening room.
CODE SET
SHIFT
HALL
1
SETUP
SPORTS MONO MOVIE
5
PLAY MODE
/DTS SELECT
9
9, 0
TOP MENU
LEVEL
PRESET
u, d
CH
ENTER
PRESET
TEST
ON SCREEN
(U.S.A. model)
1
Press AMP.
2
Press the numeric buttons 9 and 0
repeatedly to select PRO LOGIC II Music.
3
Press u / d to select the parameter.
4
Press j / i to change the parameter value.
5
Repeat steps 3 and 4 above as necessary to
change other parameters.
68
VIDEO 1
CD
AMP
DVD AMP
JAZZ ROCK ENTERTAINMENT
2 3 4
ANGLE MARKER
MOVIE 1 MOVIE 2
6 7 8
REPEAT A–B
MATRIX 6.1 STEREO
> – 10
0 CANCEL
GROUP PAGE
MENU
SET MENU
MUTE
ABCDE
CH
B. BOOST
VOL
RETURN
j, i
I PRO LOGIC II Music parameter
descriptions
PANORAMA
Function: Turning the function on extends the front
stereo image to include the surround
speakers for wraparound effect.
Choices: OFF/ON, initial setting is OFF.
DIMENSION
Function: Gradually adjusts the soundfield either
towards the front or towards the rear.
Control range: –3 (towards the rear) to +3 (towards the
front), initial setting is STD (standard).
CT WIDTH (Center width)
Function: Adjusts the center image from the center
and front speakers to varying degrees. The
larger the value, adjusts the center image
towards the front left and right speakers.
Control range: 0 (center channel sound is output only
from center speaker) to 7 (center channel
sound is output only from front left and
right speakers), initial setting is 3.