MULTIQUIP Power WHISPERWATT DCA-220SSJ Operation And Parts Manual page 29

Select Units
1. Starting at the single or four engine parameter display
touch the "Menu Button".
0 1500 3000
1800 RPM
ENG RPM
COOL TEMP
2. The main menu will pop up on the display. Use the arrow
buttons to scroll through the menu until the "Select
Units" is highlighted.
3. Once the "Select Units" menu item has been highlighted
touch the "Enter Button" to access the "Select Units"
function.
4. Use the arrows to highlight the desired units. "English"
for imperial units i.e. PSI,"F or Metric kPa, Metric Bar
for IS units i.e. kPa, Bar, "C.
DCA-220SSJ— OPERATION AND PARTS MANUAL — REV. #1 (03/22/07) — PAGE 29
1000 RPM
98%
ENG RPM
LOAD RPM
14.2 57 PSI
BATT VOLT OIL PRES
GO TO 1-UP DISPLAY
STORED CODES
ENGINE CONF G
SETUP 1-UP DISPLAY
SETUP-4-UP DISPLAY
SELECT UNITS
ADJUST BACKLIGHT
GO TO 1-UP DISPLAY
STORED CODES
ENGINE CONF G
SETUP 1-UP DISPLAY
SETUP-4-UP DISPLAY
SELECT UNITS
ADJUST BACKLIGHT
ENGLISH
ESPANOL
FRANCAIS
DEUTSCH
DCA-220SSJ — DIAGNOSTIC DISPLAY
5. Touch the "Enter Button" to select the highlighted units.
6. Touch the "Menu Button" to return to the "Main Menu".
7. Touch the "Menu Button" to exit the Main menu and
return to the engine parameter display.
GO TO 1-UP DISPLAY
STORED CODES
ENGINE CONF G
SETUP 1-UP DISPLAY
SETUP-4-UP DISPLAY
SELECT UNITS
ADJUST BACKLIGHT
Setup 1- Up Display
1. Starting at the single engine parameter display, touch
the "Menu Button".
0 3000
1500
1800 RPM
ENG RPM
TEMP
COOL
2. The main menu will pop up on the display. Use the
"Arrow Buttons" to scroll through the menu until the
"Setup 1-up Display" is highlighted.
ENGLISH
METRIC KPA
METRIC BAR
ENGLISH
*
METRIC KPA
METRIC BAR
98%
LOAD RPM
14.2
BATT VOLT
1000 RPM
98%
LOAD RPM
14.2
BATT VOLT
GO TO 1-UP DISPLAY
STORED CODES
ENGINE CONF G
SETUP 1-UP DISPLAY
SETUP-4-UP DISPLAY
SELECT UNITS
ADJUST BACKLIGHT
1
1000 RPM
ENG RPM
57 PSI
OIL PRES
ENG RPM
57 PSI
OIL PRES