Table of Contents
Advertisement
3.
Once the "Adjust Backlight" menu item has been
highlighted touch the "Enter Button" to activate the
"Adjust Backlight" function.
GO TO 1-UP DISPLAY
STORED CODES
ENGINE CONF
SETUP 1-UP DISPLAY
SETUP-4-UP DISPLAY
SELECT UNITS
ADJUST BACKLIGHT
4.
Use the "Arrow Buttons" to select the desired backlight
intensity.
5.
Touch the "Menu Button" to return to the main menu.
6.
Touch the "Menu Button" to exit the Main menu and
return to the engine parameter display.
GO TO 1-UP DISPLAY
STORED CODES
ENGINE CONF
G
SETUP 1-UP DISPLAY
SETUP-4-UP DISPLAY
SELECT UNITS
ADJUST BACKLIGHT
PAGE 28 — DCA-220SSJ— OPERATION AND PARTS MANUAL — REV. #1 (03/22/07)
G
ADJUST BACKLIGHT
ADJUST BACKLIGHT
1000 RPM
98%
LOAD RPM
ENG RPM
14.2
57 PSI
BATT VOLT
OIL PRES
DCA-220SSJ — DIAGNOSTIC DISPLAY
Contrast Adjustment
1.
Starting at the single or four engine parameter display,
touch the "Menu Button".
0
1500
1800 RPM
ENG RPM
COOL
2.
The main menu will pop up on the display. Use the "Arrow
Buttons" to scroll through the menu until "Adjust Contrast"
is highlighted.
3.
Once the "Adjust Contrast" menu item has been
highlighted touch the "Enter Button" to activate the
"Adjust Contrast" function.
4.
Use the "Arrow Buttons" to select the desired contrast
intensity.
5.
Touching the "Menu Button" will take you back through
the menus.
98%
3000
LOAD RPM
14.2
TEMP
BATT VOLT
GO TO 1-UP DISPLAY
STORED CODES
ENGINE CONF
G
SETUP 1-UP DISPLAY
SETUP-4-UP DISPLAY
SELECT UNITS
ADJUST BACKLIGHT
STORED CODES
ENGINE CONF
G
SETUP 1-UP DISPLAY
SETUP-4-UP DISPLAY
SELECT UNITS
ADJUST BACKLIGHT
ADJUST CONTRAST
ADJUST CONTRAST
1000 RPM
ENG RPM
57 PSI
OIL PRES
Advertisement
Table of Contents
