MULTIQUIP Power WHISPERWATT DCA-400SPK Parts And Operation Manual page 37

DCA-400SPK — OUTPUT TERMINAL PANEL OVERVIEW
How to read the output terminal gauges.
The gauges and knobs on the control panel DO NOT effect
the generator output in any fashion. They are there to
simply help the operator observe how much power is being
supplied produced at the UVWO legs.
To read the output of the W-U legs, for example, place the
AC Voltmeter Change-over switch to the W-U position and
the AC ammeter Change -over Switch to the U or W
position to read the output on the selected leg.
FIGURE 15. AC Voltmeter
FIGURE 16. AC Voltmeter
Change-over switch
Gauge
(Reading the W-U leg on
(Volt reading on W-U Lug)
the output terminal panel)
FIGURE 18. AC Ammeter
FIGURE 17. AC Ammeter
(Amp reading on U lug)
Change-over Switch
(Reading the U leg on the
output terminal panel)
DCA-400SPK — PARTS AND OPERATION MANUAL — REV. #0 (06/19/01) — PAGE 37