Be sure that nothing obstructs the required air flow
openings in the front of the cabinet.
For best performance, brush or vacuum lint and dirt
from the condenser once a year. Unscrew the grille
on the bottom front of the cabinet to access the
Wash the inside with mild soap and water or baking
soda and water.
Do not use an abrasive powder, solvent, polish cleaner
or undiluted detergent.
The vinyl gasket may be cleaned with mild soap and
water, a baking soda solution or a mild scouring
powder. Rinse well.
In the Event of a Power Failure
If the power fails, open the door as infrequently as
possible to maintain the temperature. A gradual rise
in temperature should not have any adverse effect
on the wine.
If it is extremely hot, you may want to move the
wine to the coolest location you can find until power
CARE AND CLEANING
Unplug the wine chiller before cleaning.
The painted cabinet can be washed with mild soap
and water. Rinse thoroughly with clear water. Never
use abrasive scouring powders.
Use a glass cleaner or mild soap and water and a soft
cloth to clean the glass door. Do not use any abrasive
Light Bulb Replacement
Unplug the wine chiller before replacing the light
The light shield is held in place by three screws.
Remove the screws and light shield to remove the
light bulb. Replace with the same type bulb—a
15-watt, intermediate base bulb.
Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any