Solving Network Problems; Network Software Cannot Find Product On A Network; Cannot Print Over A Network - Epson WorkForce WF-7010 User Manual

• If you see any error message or your software does not install correctly in Windows, you may not have
software installation privileges. Contact your System Administrator.
Parent topic:
Related concepts
When to Uninstall Your Product Software
Related references
Windows System Requirements
Mac System Requirements

Solving Network Problems

Check these solutions if you have problems setting up or using your product on a network.

Network Software Cannot Find Product on a Network

Cannot Print Over a Network

Printing a Network Status Sheet
Parent topic:
Network Software Cannot Find Product on a Network
If EpsonNet Setup cannot find your product on a network, try these solutions:
• Make sure your product is turned on and connected to your network. Verify connection using your
product control panel.
• If necessary, reinstall your product software and try running EpsonNet Setup again.
Parent topic:
Related concepts
When to Uninstall Your Product Software
Cannot Print Over a Network
If you cannot print over a network, try these solutions:
• Make sure that your product is turned on.
• Make sure you install your product's network software as described in your product documentation.
• Print a network status sheet and verify that the network settings are correct. If the network status is
Disconnected, check any cable connections and turn your product off and then on again.
Solving Setup Problems
Solving Problems
Solving Network Problems
120