Epson WorkForce WF-7010 Quick Start Manual
Epson workforce wf-7010: quick start
Hide thumbs
Also See for WorkForce WF-7010:
- User manual (157 pages) ,
- Important safety instructions manual (12 pages) ,
- Service manual (84 pages)
Advertisement
Quick Links
WorkForce
WF-7010
®
Start Here
Read these instructions before using your printer.
1
Unpack
Caution: Do not open ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Remove all tape and protective materials, including the foam and
plastic inside the printer.
2
Turn on
1
Connect the power cord.
Caution: Do not connect to your computer yet.
2
Press the
power button.
*412102600*
*412102600*
3
Install ink cartridges
1
O pen the printer cover and cartridge cover.
2
S hake each cartridge as shown for about 5 seconds and
remove from package.
3
I nstall each cartridge in the correct slot for its color.
Push each cartridge in until it clicks.
4
C lose the printer cover and the cartridge cover.
The printer starts priming the ink. This takes about 5 minutes.
When the green
power light stops flashing, priming is
complete.
Caution: Don't turn off the printer or open the cover while it is
priming or you'll waste ink.
Note: Your printer ships with full cartridges and part of the ink from
the first cartridges is used for primming the printer.
Advertisement
Related Manuals for Epson WorkForce WF-7010
Summary of Contents for Epson WorkForce WF-7010
- Page 1 WorkForce WF-7010 ® Start Here Read these instructions before using your printer. Unpack Caution: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. Remove all tape and protective materials, including the foam and plastic inside the printer. Turn on Connect the power cord. Caution: Do not connect to your computer yet. Press the power button. *412102600* *412102600* Install ink cartridges O pen the printer cover and cartridge cover. S hake each cartridge as shown for about 5 seconds and remove from package. I nstall each cartridge in the correct slot for its color. Push each cartridge in until it clicks. C lose the printer cover and the cartridge cover. The printer starts priming the ink. This takes about 5 minutes. When the green power light stops flashing, priming is complete. Caution: Don’t turn off the printer or open the cover while it is priming or you’ll waste ink.
- Page 2 R eplace the cover and gently insert the paper cassette. E xtend the output tray and raise the stopper as shown. (If you are loading legal-size or A3 paper, do not raise the stopper.) Choose your connection You can connect your printer to your existing network using an Ethernet cable, or directly to your computer using a USB ® cable. See below for details on each connection method. Note: Do not connect the printer to your computer until you’re instructed to do so. Direct USB connection Make sure you have a USB cable. (Not included.) Wired Ethernet connection Make sure you have an Ethernet network cable. (Not included.) You must install the software on every computer from which you want to print. Install software ote: If your computer does not have a CD drive, you can download the software from the Epson website, as described under “Epson technical support.” M ake sure the printer is NOT CONNECTED to your computer. Windows : If you see a Found New Hardware screen, click ® Cancel and disconnect the USB cable. You can’t install your software that way.
- Page 3 Recycling Epson offers a recycling program for end of life products. Please go to www.epson.com/recycle for information on how to return your products for proper disposal. Any problems? Network setup and printing problems • Press the • Disable the firewall temporarily to see if that may be Setup is unable to find my printer after connecting it with a USB cable. Make sure it is securely connected as shown: Print quality problems ® • Make sure your paper is loaded printable side down in the • If you notice light or dark bands across your printouts or • The ink cartridges may be low on ink. Check your cartridge to 8...
-
Page 4: Error Indicators
Make sure you have a replacement cartridge. The printer cover is open. Close the printer cover. The printer’s ink pads are nearing or at the end of their service life. Contact Epson support to replace ink pads. Resume printing by pressing the button.