Print Head Cleaning; Cleaning The Print Head Using The Product Buttons - Epson WorkForce WF-7010 User Manual

6. If there are no gaps, click Finish.
If there are gaps or the pattern is faint, clean the print head.
Parent topic:
Related concepts

Print Head Cleaning

Related topics
Replacing Ink Cartridges
Print Head Cleaning
If print quality has declined and the nozzle check pattern indicates clogged nozzles, you can clean the
print head.
Note: You cannot clean the print head if an ink cartridge is expended, and may not be able to clean it
when a cartridge is low. You must replace the cartridge first.

Cleaning the Print Head Using the Product Buttons

Cleaning the Print Head Using a Computer Utility
Parent topic:
Related topics
Replacing Ink Cartridges
Cleaning the Print Head Using the Product Buttons
You can clean the print head using the buttons on your product.
1. Make sure no product lights are indicating errors.
2. Load a few sheets of plain paper in the product.
3. Hold down the
Print Head Nozzle Check
Print Head Maintenance
ink button for 3 seconds to start the cleaning cycle, which lasts around 1 minute.
105