Table of Contents
Advertisement
TOC
D. PERFORMING A ROBOTIC SELF-TEST
To ensure that everything is working properly, a Self-Test fea-
ture is built in to your Publisher. In this mode, the Robotic Disc
Transporter will go through the motions of picking and placing
a disc to ensure proper working order. This test may be per-
formed without connecting the Publisher to the PC.
Perform the test by doing the following steps:
•
Load some discs into the Input Bin
•
Open the TOP DRIVE by pressing the eject button on the
drive.
•
The cover must be closed for this operation to complete.
However, in order to access the buttons you must open the
cover. To get around this problem simulate closing the cover by
activating the cover lock sensor. You may do this by putting an
object such as a folded piece of paper in the slot where the lock
would normally be located.
•
With the Publisher turned on, press the
Cartridge Button
•
While holding the Cartridge Button, press the Power
Button until the robotics start to move.
•
Release both buttons
•
To stop the test, wait until the disc has moved to the
Output Bin and press the Power Button.
E. CLEANING THE PRINT HEAD
It may be necessary to clean the print head nozzles if you
notice reduced print quality, or if you suspect a nozzle has
become slightly dried out or clogged. If the printer has been
switched off for several weeks you may have to perform both
the automatic and manual method multiple times.
Tips: 1. The 4100 will automatically do periodic print head mainte-
nance to keep it ready for printing. However, this will only
occur if you leave it plugged in and turned on.
2. Purchase a backup print head to maintain uniterrupted
printing capability. Part Number 053451.
Maintenance and Troubleshooting
44
INDEX
Hide quick links:
Advertisement
Table of Contents
