Replacing The Print Head - Primera Bravo 4102 XRP User Manual

TOC
F. REPLACING THE PRINT HEAD
Replacing the printhead may become necessary if you notice a
gradual decrease in print quality, if one or more colors are
missing from a print or if some of the print nozzles are still
clogged after repeated manual cleanings as described in
Section 3D.
Follow this procedure:
1. Open the Cover. Press the Ink Cartridge Button.
2. Remove all cartridges. Press the release tab at the front of
the carriage to release the latch.
3. Remove the print head. Grasp the print head near the back
as shown in the illustration.
Maintenance and Troubleshooting
46
INDEX