Run Mode - Omron EasySpeed 3G3JE User Manual

Operation
3-4

RUN Mode

3-4-1 Run/Stop Command
Set P01 in the initial settings mode to the rated current given on the motor's nameplate before opera-
tion. Setting the rated current correctly will protect the motor from burning due to an overload. For
details on the procedure, refer to 3-6-1 Setting the Rated Motor Current.
Operating and Stopping
■
• Press the RUN KEY to operate the motor.
• Press the STOP/RESET KEY to stop the motor.
• The @ RUN indicator will light during operation.
• In RUN mode, operation can always be started or stopped regardless of whatever item is currently
being displayed.
Key sequence
@ Hz set
@ RUN
RUN
@ RUN
STOP
Goes out.
RESET
Indicator Display example
60.0
60.0
60.0
Explanation
Go to RUN mode and press the Mode Key to
Hz set indicator. The present fre-
light the @
quency reference will be displayed on the
data display.
Press the RUN Key to start the motor. The @
RUN indicator will light.
Press the STOP/RESET Key to stop the motor.
RUN indicator will go out.
The @
Chapter 3
3-9