Using The Stage Setups (Tutorial - Casio Privia PX-5S User Manual

Using the Stage Setups (Tutorial)

Display Text
Key Range High
Velo.Range Low
Velo.Range
High
Volume
Pan
Coarse Tune
Fine Tune
Bend Range
Down
Bend Range Up
Chorus Send
Delay Send
Reverb Send
Resonance Send
Reso.Return
Level
Controller Edit >Ent Controller parameters. This is a group of editable controller parameters.
Knob1 Enable
Knob2 Enable
Knob3 Enable
Knob4 Enable
Slider1 Enable
Slider2 Enable
Slider3 Enable
Slider4 Enable
Slider5 Enable
Slider6 Enable
Bender Enable
Wheel Enable
Pedal1 Enable
E-32
Key Range High. Specifies the high range of the keyboard for each zone.
This setting is used in combination with the Key Range Low setting to
configure key ranges for each zone.
• After pressing the en (NUM KEY) button to enter the number input
mode, you can use the keyboard keys to enter values.
Velocity range low. This is the minimum velocity value of each zone. This
setting is used in combination with the Velo.Range High setting below to
configure velocity ranges for each zone.
Velocity range high. This is the maximum velocity value of each zone. This
setting is used in combination with the Velo.Range Low setting above to
configure velocity ranges for each zone.
Volume. This setting is the same as the mixer function part volume (page
E-37).
Panning. Adjusts the left-right position of sound in the stereo field. This
setting is the same as the mixer function part panning (page E-37).
Coarse tune. Shifts the pitch of notes by semitone units.
Fine tune. This setting is the same as the mixer function part fine tune (page
E-37).
Bend range down. Pitch change amount for downward bender operation.
Bend range up. Pitch change amount for upward bender operation.
Chorus send. This setting is the same as the mixer chorus send (page E-37).
Delay send. This setting is the same as the mixer delay send (page E-37).
Reverb send. This setting is the same as the mixer reverb send (page E-37).
Resonance send. Enables/disables send to the resonance function of each
zone.
Resonance return level. This setting is the same as the mixer resonance
return (page E-37).
Knob 1 on/off (Knob 1 enable). Enables/disables
zone.
Knob 2 on/off (Knob 2 enable). Enables/disables
zone.
Knob 3 on/off (Knob 3 enable). Enables/disables
zone.
Knob 4 on/off (Knob 4 enable). Enables/disables
zone.
Slider 1 on/off (Slider 1 Enable). Enables/disables
zone.
Slider 2 on/off (Slider 2 Enable). Enables/disables
zone.
Slider 3 on/off (Slider 3 Enable). Enables/disables
zone.
Slider 4 on/off (Slider 4 Enable). Enables/disables
zone.
Slider 5 on/off (Slider 5 Enable). Enables/disables
zone.
Slider 6 on/off (Slider 6 Enable). Enables/disables
zone.
Bender on/off (bender enable). Enables/disables
for each zone.
Modulation wheel on/off (wheel enable). Enables/disables
(MODULATION) operation for each zone.
Pedal 1 on/off (pedal 1 enable). Enables/disables operation of a pedal
connected to fk (DAMPER/PEDAL 1) for each Zone.
Description
3 (K1) operation for each
3 (K2) operation for each
3 (K3) operation for each
3 (K4) operation for each
4 (S1) operation for each
5 (S2) operation for each
6
(S3) operation for each
7 (S4) operation for each
8 (S5) operation for each
9 (S6) operation for each
1 (BENDER) operation
Settings
C- - G9
0 - 127
0 - 127
0 - 127
–64 - 0 - +63
–24 - 0 - +24
–99 - 0 - +99
0 - 24
0 - 24
0 - 127
0 - 127
0 - 127
Off, On
0 - 127
Off, On
Off, On
Off, On
Off, On
Off, On
Off, On
Off, On
Off, On
Off, On
Off, On
Off, On
2
Off, On
Off, On