To Change The Tempo When Playing Back A Song; To Clear A Track Or Initialize A Song - Casio Privia PX-5S User Manual

Recording and Playing Back Phrases (Tutorial)
2.
Edit the song as desired.
• To configure mixer settings, select "Song Mixer".
• The parameters of the mixer settings are described in the table below.
Display Text
Bank Select MSB
Program Change
Channel
Volume
Pan
Coarse Tune
Fine Tune
Bend Range
Chorus Send
Delay Send
Reverb Send
Generator Out
USB Out
MIDI Out
To change the tempo when
playing back a song
1.
Perform steps 1 and 2 of the procedure under
"Mixer Settings When Playing Back a Song"
(page E-29) to select "Tempo".
2.
Adjust the tempo setting.
E-30
Bank select MSB. Specifies the bank select MSB number.
• To specify a tone on the song mixer screen, specify "Bank Select MSB" and
"Program Change" numbers, referring to the "Tone List" at the back of this
manual.
Program change. Specifies the program change number. For details, see "Bank
Select MSB", above.
Specifies the output channel number.
Volume.
Panning. Adjusts the left-right position of sound in the stereo field.
Coarse tune. Shifts the pitch of notes by semitone units.
Fine tune. Shifts the pitch of notes by cent units.
Bend range. Specifies (in semitone units) the maximum change in pitch when the
1 (BENDER) wheel is rotated.
Chorus send. Specifies how the chorus effect is applied.
Delay send. Specifies how the delay effect is applied.
Reverb send. Specifies how the reverb effect is applied.
Internal send (Gen Out) on/off. Specifies whether or not to send information
about each part to the Digital Piano's internal sound source.
USB output (USB Out) on/off. Specifies whether or not MIDI send of the
information of each part is performed from
MIDI output (MIDI Out) on/off. Specifies whether or not MIDI send of the
information of each part is performed from
Description
et (USB).
fl (MIDI OUT/THRU).
To clear a track or initialize a
song
1.
Perform steps 1 and 2 of the procedure under
"Mixer Settings When Playing Back a Song"
(page E-29) to select the setting you want.
• To clear a track, select "Track Clear". Next, on the
screen that appears, use the
buttons to select the track you want to clear.
• To initialize the song, select "Song Initialize".
2.
em
Press the
• This will display a confirmation message ("SURE?").
• If you want to cancel the operation, press the
dr
or (EXIT) button.
3.
Press the eo
• "Complete!" appears on the display after the process
is complete.
0 - 127
0 - 127
1 - 16
0 - 127
–64 - 0 - +63
–24 - 0 - +24
–99 - 0 - +99
0 - 24
0 - 127
0 - 127
0 - 127
Off, On
Off, On
Off, On
dk minus (–) and plus (+)
(ENTER) button.
(YES) button.
Setting
eo (NO)