Using Dcp-200 For The First Time; Connect The Pedal Board; Connect The Power Cable - M-Audio DCP-200 User Manual

DCP-200
5

Using DCP-200 for the First Time

Everything you need to know to start making music with DCP-200 is right here in this short section.

Connect the Pedal Board

Connect the Power Cable

1
2
AC100-240V – 50/60HZ
AC100-240V – 50/60HZ
PEDAL
CAUTION
ON / OFF
PEDAL
CAUTION
Connect the Pedal Board cable to the Pedal
Connector on the rear panel of the piano.
Make sure that the Power On/Off Switch is in the "Off"
(up) position.
Connect the included AC cable to the Power Socket on
the rear panel of the piano, and plug the other end into an
active AC outlet.
9
User Guide