Table of Contents
Advertisement
DCP-200
Piano Reset
As soon as the Piano Reset function is activated (by pressing the Reverb and Voice/Function buttons
simultaneously), the device will perform the following functions:
1.
Turn Local On
2. Send 'All Notes Off' Command on MIDI Channel 1 - external and to the internal sound engine
3. S end 'Reset All Controllers' Command on MIDI Channel 1 - external and to the internal sound
engine
4.
Assign Data Control to Voice Select
5.
Set Volume levels for Main Voice, Split Voice and Layer Voice to defaults
6.
Set Pan to 64 for Main Voice, Split Voice and Layer Voice
7.
Turn off Layer Mode and Split Mode
8.
Set Main MIDI Transmit Channel to 1
9.
Set Transpose and Octave Shift both back to zero
10. Send a Program Change = 0 on Channel 1
11. Send a Bank Change MSB = 0 and Bank Change LSB = 0 on Channel 1
12. Set the Reverb Depth back to the default value for the Default Voice
13. Send Chorus Depth = 0 on Channel 1
14. Send the current status of the Sustain Pedal on Channel 1
Additional Default Information
‣
Reverb Defaults
PGM
0
1
2
3
4
5
6
7
MIDI Channel 10
‣
Other Defaults
Parameter
Octave Shift
Transpose
Voice Vol
Layer Vol
Split Vol
Metronome Vol
Tempo
Program
Bank LSB
Bank MSB
Channel
Voice Select
Tuning
1 tone = 100 cents, therefore -50 to +50 cents = -1 to +1 semi-tone.
6
Note this is shown in MIDI steps -64 to 63.
Sound Name
Reverb On/Off
Grand Piano
On
Bright Piano
On
Vintage EP
On
FM EP
On
Church Organ
On
Harpsichord
On
Strings
On
Upright Bass
On
(Metronome) Off
n/a
Default Value
0
0
127
90
127
127
120
0
0
0
1
1 (Grand Piano)
440 Hz (display shows '0')
User Guide
Reverb Depth
40
40
40
48
96
40
64
32
0
Range
-3 to +3
-12 to +12
0 to 127
0 to 127
0 to 127
0 to 127
20 to 280 bpm
0 to 127
0 to 127
0 to 127
1 to 16
1 to 8 (display shows Voice names)
-64 (-50 cents) to 63 (+50 cents) in 128 MIDI steps
71
6
Hide quick links:
Advertisement
Table of Contents
