DCP-200
Program Change, Bank LSB, and Bank MSB
The following section demonstrates how to send MIDI Program Changes, Bank LSB (Least Signifi cant Byte)
and Bank MSB (Most Signifi cant Byte) values from DCP-200 to an external MIDI device or virtual instrument
software program.
Sending MIDI Program Changes
T here are two ways to send MIDI Program Number changes. You can either enter a single specifi c
Program Number (Data Control knob assignment remains unchanged), or you can assign the Data
Control knob to send MIDI Program Changes.
‣
T o send a single specifi c Program Number (Data Control knob assignment remains
unchanged):
1
pNo
Reverb
Song
Data Control
[Assignable]
2
C5
Voice / —
Function
Metronome
RECORD
C6
F#5
Press the Voice/Function button to enter Edit Mode.
C7
User Guide
Press the Program Key
(F#5).
ON / OFF
57