Octave, Transpose, And Master Tuning; Octave (C#0) - M-Audio DCP-200 User Manual

DCP-200

Octave, Transpose, and Master Tuning

To access the Octave, Transpose, and Master Tuning editing functions, press the Voice/Function button to enter
Edit Mode. Then press the designated key to access the desired function.

Octave (C#0)

Pressing this key will set the Data Control knob to increase or decrease the keyboard's octave setting.
1
pNo
Reverb
Song
RECORD
Data Control
[Assignable]
2
MASTER VOLUME
oct
Voice / —
Reverb
Function
Song Metronome
RECORD
Data Control
[Assignable]
3
Reverb
Song
RECORD
Data Control
[Assignable]
Press the Voice/Function button to enter Edit Mode.
Voice / —
Function
Metronome

C0
C#0
Use the Data Control knob to select the desired Octave.
2
Turning the Data Control knob clockwise will raise the keyboard's
pitch in octave increments, and turning it counter-clockwise will
lower it in octave increments. The display will show a positive,
Voice / —
Function
negative, or zero value.
Metronome
‣
N OTE: To reassign the Data Control knob for Voice Selection,
press the Voice / Function button and then press the Eb2 key. (This
procedure is illustrated at the beginning of the "Edit Mode" section.)
Press the Octave Key (C#0).
T he LED display will momentarily show
C1
39
User Guide