Layer Mode - M-Audio DCP-200 User Manual

DCP-200

Layer Mode

In Layer Mode, DCP-200 will play two voices simultaneously on each key.
‣
To use Layer Mode:
1
PNo
Reverb
Song
RECORD
Data Control
[Assignable]
MASTER VOLUME
LYR
Reverb Voice / —
Function
Song Metronome
RECORD
Data Control
[Assignable]
2
DCP-200 is now in Layer Mode. Both the Main and Layer Voices will sound when keys are pressed.
<
(In the example illustration, Bright Piano is the Main Voice (because it is selected first), and Strings
is the Layer Voice (because it is selected second).
I f the Data Control knob is used to change voices while in Layer Mode, it will affect the Layer Voice
<
only. The Main Voice (original voice) will stay the same until Layer Mode is turned off again.
P lease note that polyphony may be reduced while Layer Mode is in use.
<
Press the Voice/Function button to enter Edit Mode.
Voice / —
Function
Metronome
3

2. Press and hold down a Voice Select key
(any white key in the lowest octave of the
piano). This will select the Main Voice. (See
the section on Using the Voice Select Keys
at the beginning of the Edit Mode Functions
section for more information on selecting
voices in this manner.)
3. W hile continuing to hold the first Voice
Select key, press a second Voice Select key.
This will select the Layer Voice.
While both keys are held down the display
will show:
35
User Guide